.png){kind=small}
Products
Care
This is your Project Page. It's a great opportunity to help visitors understand the context and background of your latest work. Double click on the text box to start editing your content and make sure to add all the relevant details you want to share.
DAILY ROUTINE
JUST USE WATER, DISH SOAP, AND PAPER TOWEL OR A DAMP SPONGE TO ABSORB ANY SPILLS AFTER FOOD PREPARATION. IF NEEDED, USE ANY NON-ABRASIVE CLEANER SUCH AS FORMULA 409, LYSOL, WINDEX, AND FANTASTIC TO WIPE AWAY ANY EXCESS. BE SURE TO DRY THE AREA THOROUGHLY WITH A CLEAN CLOTH. IT IS STRONGLY RECOMMENDED TO CLEAN UP ANY SPILLS/SPOTS WITHIN 24 HOURS.
TOUGH SPOTS
-
Leave any of the above cleaners to sit on the affected area for a few minutes.
-
Soak the affected area with pads of paper towels for 5 to 10 minutes.
-
Scrub the area gently with a non-scratch pad such as Scotch Brite pad in circular movement.
-
Rinse with clean water thoroughly.
-
Dry thoroughly.
-
For even tougher spots, please contact gran quartz. (Address: 51 Caldari Rd Unit B5, Concord, ON L4K 4G3, Phone number: +1 800-520-7223)
REMOVING ADHERED MATERIALS
-
Scrape the surface with a plastic putty knife or a razor. Ni Surfaces are very hard and will not be harmed by razor edges.
-
Rinse with clean water thoroughly.
-
Dry thoroughly.
-
Any gray marks left by the blade can be removed with Soft Scrub All Purpose Cleanser.
-
If necessary, use Windex streak free to clean any gel residue.
CAUTION
-
Do not use abrasive scrubs(Vim with microparticles). Always use non-scratch pads such as Scotch Bride pad.
-
Do not use harsh chemicals(Acetone, Varsol, Paint thinner, Bleach), or abrasive oven and plumbing cleaners (Drano, Easy OFF, and Liquid Plumber). These chemicals will dull the surface finish.
-
Do not use products containing oils or powders because they leave residue.
-
Do not use knives directly on the quartz surface. Always use a cutting board.
-
Do not place hot pots, pans, or electric skillet directly on the quartz surface. Always use trivets or hot pads. Extreme heat may cause thermal shock and crack the surface in long term.
-
Minimize direct sun exposure to Ni surfaces. Long-term exposure to direct sunlight may discolor surface finish. Ni surfaces is only for interior applications.
